Brief Overview of Professional Car Polishing Process at Opti Coat India
The natural
pollutants may leave unsightly marks on the clear coat of a car’s paint. To
remove these imperfections, it is essential to polish a car at routine
intervals. The car polishing process is equally
essential before the application of ceramic paint-protection coating or film.
These highly durable coats may last for years and may bury any type of
imperfection for years. It is only possible to remove these defects after
stripping off the clear-coat of ceramic. Hence, it is prudent to polish a car
before the application of paint-protection coating or waxing. Experienced auto-detailers
focus on polishing due to this reason and never apply paint-protection coating
or film without polishing.
Car Detailing |
Deep
Rinsing
Opti Coat India
experienced auto-detailers start the polishing process with deep car cleaning.
It is a vital step before polishing because the dirt particles may leave swirl
marks. These professionals use pressurized jets of water to clean the cars.
These professionals use proprietary pressure washers, such as HRC-PRO, HRK-PRO
or Susette-180/13, to clean the cars with pressurized jets of foam and hot/cold
water.
These
semi-automatic washers have suitable accessories to clean any automobile within
a few minutes’ time. The auto-detailers use a twin-foam lance to cover an
entire car with the foam of proprietary cleaning solution. This solution can
readily dissolve the dirt and the pressured jets of water can quickly wash the
dirty foam away from every inch of any car. These experts use a shaded area to
clean the cars to prevent the foam from drying and leaving unsightly marks. The
tires, hubcaps and chassis also receive a thorough cleaning.
Polishing
Process
Car detailing
process starts after cleaning and wiping of the car. The vehicle is softly
wiped to keep it moist for polishing. Opti Coat India auto-detailers use a
rotary machine and a damp polishing pad to spread the polishing compound onto a
small surface of a car. The machine rotates at a medium speed whilst spreading
the compound and polishing the surface at the same time. The expert detailers
know to keep the pad parallel to the surface and to move back and forth to
avoid swirl marks.
The paint starts
heating up due to friction with the rotary wheel and the scratch marks in the
top-coat start disappearing. The experienced detailers take precautionary
measures to avoid damages to the trim areas, as the edge of the polishing pad
touches these areas with higher force. However, the cars can avoid having a
burnt finish due to expertise of these detailers.
Final
Step during Polishing
Thanks for sharing Info. If a person wants to know about ceramic coating in delhi ncr. I think that this is the place for you!
ReplyDelete