Permanent Ceramic Coating: Opti Coat PRO
I want to talk about the back
days, car detailing industry received a bad reputation but with the passage of
time the image has changed and people are positive towards it. Traditionally,
the dealership products for paint protection were not other than any bit
durable paint sealant. So, after every six-month, reapplication was needed and
if you miss the schedule the application, the warranty of the protective layer
would be voided. Well, things are now different and paint protection processes
like ceramic coating have come a
long way over decades as people showed their interest.
DEFINING THE TERM “OPTI COAT PRO”
It is a completely different
paint protection product which is long durable or says permanent. It is sold at
car detailing outlets and is only applied through professionals. It is applied
once over the car exterior surface and protects it from environmental hazards
permanently. It is a product from Optimum Polymer Technologies which is
somewhat like wax coating applied onto the car’s surface. Imagine a car going
through the brushless car wash and coming out looking absolutely fresh and
detailed. I am talking about a really detailed car, not exactly the one which
is rinsed off using harsh chemicals and recycled water. Car detailing is a big
term to deal with on an easy note.
![]() |
Opti-Coat Pro |
Opti coat Pro is a crystal-clear
ceramic polymer coating which chemically bonds to factory clear coat to form a
permanent layer. It’s not a kind of wax or any sort of sealant which will wash
away or break down after a certain time frame and with direct exposure to any
environmental hazards like chemical etching or stone chips. It is harder and
thicker than the factory surface clear coat and can really absorb the damages
which would otherwise directly hamper the painted layer of the car. over the
top of body protection, Opti Coat has shown its full resistance towards any
sort of alkaline or acidic substances like tree sap, bird dropping or even any
harsh chemicals used in name of cleaners. It will surely not dissolve, etch or
maintain a glossy and clear finish. In fact, this Opti Coat Pro turns up with a
warranty period of car’s paintwork protection.
A typical factory clear coating
measures generally 35 to 50 microns in terms of thickness that is somewhat as
thick as the human hair. The significant thickness of this ceramic coating
measures up to double up microns in thickness and talking about a wax then its
measurement lies less than 0.02 micron.
This significant measurement of
thickness permits this ceramic coating to protect the car against any damage
which would in another way directly affect the original factory paint. Swirl
marks and few of the light scratches are not just reduced by the Opti-Coat
ceramic coating, the original factory paint is even having a shield against the
damages caused by UV and oxidization.
In addition to any kind of
physical protection this Opti-Coat PRO gives, this ceramic coating is also a
highly hydrophobic surface, that means that it sheds off water, dirt, dust and
road grime very easily. In short, this explains that the surface having ceramic
coating is easier to clean and maintain and even stays new and clean for
longer.
CERAMIC COATING Installation:

Installation of Ceramic Coating

At first look, the ceramic
coating installation method seems very easy – just wipe the product and allow it
to settle by drying. But this is not that easy and applying Opti coat is a big
deal. Here is the detailed process of ceramic installation which initiates with
thorough washing then proceeded by clay bar treatment. Only deionized water is
used along with car detailing tools and latest techniques designed mainly to
minimize certain scratching. Further chemical degreaser is used to wash off any
remaining grime, dust, oil, or grease. The car is then further dried using the
compressed air.
At this point in time, the car is
prepared for any sort of paint correction process. Scratch marks and light
swirl marks are easily removed using the process of compounding and then
polishing before the application of Opti-Coat PRO. Any kind of paint
imperfections will be trapped otherwise under the hard-ceramic coating layer.
After any of the paint correction steps, the car is further ready for the
initial step of the installation process Opti-Coat PRO– the professional
application of Opti-Coat PRO primer polish. This primer polish is light polish
which is designed for preparing the factory car coated surface so to receive
the ceramic coating. A professional primed clear coat surface will permit the
ceramic coating to optimally bond.
Next, the car is taken into the
state of the art, properly sealed installation outlets where it is treated
professionally, wiped down, for the final round, using a proper mixture of
water and alcohol. After ensuring that the car paint protection for
surface is completely free from any leftover primer polish, grimes and dust,
professionals start the real installation of the ceramic coating. Opti coat pro
is completely different from the ceramic pro but if you get into the car
detailing world, there are professionals who claim it to be the same.
“Opti-Coat PRO” is applied over
the cleaned using a foam applicator pad. Once it is properly wiped on, this car
coating will self-level and start to bond chemically with the car’s factory
clear coat surface, as the liquid source evaporates. Opti-Coat PRO is applied
in sections of the car as you are left with limited time for wiping on the
applied product, hold on for few seconds so that it properly flash, and further
wipe off the remaining add on the material. It can be a lengthy process to
apply the ceramic coating on the entire car surface.
Proper care is taken to the
proper application of the coating at every nook and corner without missing out
any section of the car. The high-intensity, lighting in the sealed installation
outlets helps to ensure that the ceramic coating is properly installed. Once
Opti-Coat PRO is properly cured then comes the turn of real magic. Water, dust,
dirt, and grime easily rinses off as they don’t damage the freshly coated
surface. You can now wash odd all the other damages like a bird dropping, tree
sap or chemical residue without struggling.
Conclusion:
If compared to other brands of
ceramic coating, Opti coat is the best brand to go for. So, waiting for what.
Hurry up, take your car to any of the car detailing outlet and get it
professionally installed. Reach us http://www.opticoatindia.com/.
Comments
Post a Comment